9 show-networkcounter-log, Table 5-22, Show-rate – Artesyn ViewCheck on ATCA-9405 Installation and Use (May 2014) User Manual
Page 84: Commands execution
Commands Execution
ViewCheck on ATCA-9405 Installation and Use (6806800S51C)
84
<Value>Monitor ID</Value>
</Argument>
</InvokeMethod>
</Script>]]>]]>
The following table provides the show-rate command arguments.
5.4.9
show-networkcounter-log
show-networkcounter-log
command displays the list of network counters on devices
that have crossed the maximum rate value. For more information on command, rate, refer
.
Syntax for CLI
show-networkcounter-log
Syntax for XML
<Script>
<InvokeMethod>
<Object>
<Class>deviceCategory</Class>
<Name>SP_VEE0-{Dev Cat}</Name>
</Object>
<Method>showNetworkCounterLog</Method>
</InvokeMethod>
</Script>]]>]]>
Table 5-22 show-rate
Argument
Data Type
Description
Monitor ID
Integer
Type the unique ID of the Monitor of which rate of
change value is to be shown
Dev Instance
Enum
Use list-device-instances CLI command to get the
equivalent enumerated value of supported Device
Instance