Avalon Firestyles DVS Fireplace-1997 to 2000 - Manual (Page 6)

P AGE 6
I
NSTALLATION - For Qualified Installers Only!
Installation Preparation
! Failure to follow all of the requirements may result in property damage, bodily injury, or even
death.
! This appliance must be installed in accordance with all local codes, if any; if not, follow ANSI
Z223.1 and NFPA 54(88).
! In Manufactured or Mobile Homes must confirm with: In USA, Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part 3280; In Canada, CSA Z240.4 and Gas-
Equipped Recreational Vehicles and Mobile Housing. This appliance may be installed in
Manufactured Housing only after the home is site located.
! The DVS Fireplace is designed to operate on natural gas, or propane (LP).
! All exhaust gases must be vented outside the structure of the living-area. Combustion air is
drawn from outside the living-area structure.
! Notify your insurance company before hooking up this fireplace.
! The requirements listed below are divided into sections. All requirements must be met
simultaneously. The order of installation is not rigid Ð the qualified installer should follow the
procedure best suited for the installation.
Packing List
¥ Propane Conversion Kit
¥ Log Set (2 Logs, 2 Twigs, Bag of Coals, Coal Trays)
¥ Restrictor Adjuster Rod
¥ Flex Tube with Pipe Adapter
Additional Items Required for Installation
¥ Face (includes attachment screws)
¥ Direct Vent (Simpson Dura-Vent Ph. # 800 835-4429)
¥ Gas Line Equipment (shutoff valve, pipe, etc.)
¥ Electrical Connection Equipment (min. 18 gauge, grounded line)
Installation Overview
Non-combustible facing (see
"Facing Requirements")
See "Horizontal
Termination
Requirements"
See "Electrical
Connection"
See "Mantel Requirements"
Insulation must not fill
the spaces between
the stand-offs
See "Fireplace Placement Requirements"
The faceplate
must be 6"
minimum from
side walls.
See "Vent Requirements"
See "Minimum
Framing
Dimensions" See "Hearth Requirements"
Drywall
Nail Down Plate
See "Gas Line
Installation"
See
"Acceptable
Vent Lengths"
Optional thermostat or remote control wire.