Avery Dennison 9400 Series Programmer Manual - Manual (Page 24)

WIDTH
One to four digits to define the width of the
supply in tenths of millimeters (across the
printhead).
Values:
9425 191-634 (0.75 to 2.5 inches)
9445 191-1078 (0.75 to 4.25 inches)
9465 191-1078 (0.75 to 4.25 inches)
9474 191-1078 (0.75 to 4.25 inches)
;FORMAT_NAME
One to eight-character name assigned by
the user. It can contain any ASCII
alphanumeric character, including slash
(/), hyphen (-), space ( ), dollar sign ($), or
decimal point (.).
Note that since the Format Name is a character string, it is
preceded by a semicolon (;).
Example
{F23, 500, 200;TEXTILES
p
This format has the following attributes:
•
Format number is F23.
•
Supply length is 50 millimeters.
•
Supply width is 20 millimeters.
•
This format is named "TEXTILES."
Syntax Checklist
•
Make sure this is the first record in your format.
•
Make sure the record begins with {.
•
Make sure the first parameter (format number) begins
with F.
•
Make sure the length and width in this record matches
your supply length and width. Remember, these
numbers are in tenths of millimeters, so 500 equals 50
millimeters or 5 centimeters.
9400 Series Programmer’s Manual
4-8