Avery Dennison 9400 Series Programmer Manual - Manual (Page 62)

The following batch data stream prints the tag below.
{
B11,1,1,1,1,0,C;LETTER-A
p
T0;LETTER-A GRAPHIC
p
}
Example
G1,100,40
p
The graphic is inserted into the format as follows:
•
Insert graphic number 1 into the format.
•
Place the graphic 10 millimeters from the bottom of the
print area.
•
Place the graphic 4 millimeters from the left edge of the
print area.
Syntax Checklist
•
Make sure this record is preceded by a format header
record.
•
Make sure the first parameter in the record begins with
G.
•
Make sure the number in the first parameter matches
the number of the graphic.
•
Make sure the record ends with a record separator (
p
).
•
If this is the last record in the format, place a close
brace (}) at the end of the record.
9400 Series Programmer’s Manual
5-10