Avery Dennison 9400 Series Programmer Manual - Manual (Page 29)

Example
T05,I,0,230,30,1,1,0,0,B
p
This text field has the following attributes:
•
Text field number is T05.
•
This field does not change value with successive tickets
(IFLAG = I, increment value = 0).
•
Field begins 23 millimeters from the bottom of the print
area.
•
Field begins 3 millimeters from the left edge of the print
area.
•
The font appears at normal size (magnification = 1)
•
Standard font is used (1).
•
Tops of characters point to the top of the field (character
rotation = 0).
•
The top of the field points to the top of the supply
(rotation = 0).
•
Characters appear in Black.
Syntax Checklist
•
Make sure this record is preceded by a format header
record.
•
Make sure the first parameter (field number) begins with
T.
•
Make sure the row and column locations in this record
are less than the supply length and width.
•
Make sure you have allowed enough space to hold all
the characters in the field without running off the supply.
•
Make sure the record ends with a record separator (
p
).
•
If this is the last record in your format, place a close
brace (}) at the end of the record.
M
essag
e S
tru
ct
u
res
4. Message Structures
4-13