Avery Dennison 9400 Series Programmer Manual User Manual

Page 38

Advertising
background image

COLUMN

One to four digits to define the column
location of the field on the supply. This is
the distance from the guide edge zero
point at the

left edge of the supply and the

left edge of the field.

The zero point is 1.5 mm or 0.060 inches
from the left edge of the supply.

The unit of measurement is tenths of
millimeters. The range must be less than
the maximum width of the supply.

Values:

9425

0-508 (0 to 2 inches)

9445

0-1016 (0 to 4 inches)

9465

0-1016 (0 to 4 inches)

9474

0-1016 (0 to 4 inches)

DIRECTION

One digit to define the direction of the line.

Values:

0 = Vertical
1 = Horizontal

STOP

One to four digits to define the stop
position (Row or Column, dependent on
the DIRECTION setting) for the line.

Values:

1-2032

9400 Series Programmer’s Manual

4-22

Advertising
This manual is related to the following products: