Aviosys 9216 - Manual (Page 19)

IP SENSOR 9216 USER MANUAL
Monitoring settings
Click the setup sensor button on the left of the webpage to enter the monitoring settings webpage. User can set
the values of monitoring voltage, temperature and rotate speed etc. the up limit and lower limit of alarm is
calculated according to the percentage of set value. For example, if you monitoring voltage is 3.3V, the up limit
is 20%, the lower limit is 10%, then the up limit alarm voltage is 3.3V+3.3*20%=3.96V, the lower limit alarm
voltage is 3.3V-3.3*10%=2.97V.
1. voltage
monitoring
9216 can monitor 3 route DC voltages. The highest allowed monitoring DC voltage of P1 is 4V, P2 is 5.8V, and
P3 is 15.5V. User can set the monitoring voltage, up limit and lower limit in this range. If input voltage is higher
than the up limit or lower than the lower limit, 9216 will send SNMP alarm data package. If the beeper is enable,
the beeper will alarm. If the monitoring voltage backs to the normal range or user press the reset button on the
right of 9216, the alarm will stop. If any other monitor items trigger the alarm, the beeper will alarm again.
Notice: if the input voltage exceeds the allowed highest value, it may cause damage to your hardware.
2. Temperature monitoring
9216 can monitor 3 route temperature sensors. T1 is the temperature sensor on the circuit board of 9216. T2
and T3 are external temperature sensors. User can set the standard temperature of each sensor, if
environment temperature of sensor is high than the preset up limit, 9216 will send SNMP data package. If the
beeper is enable, the beeper will alarm. If the monitoring temperature backs to the normal range or user press
the reset button on the right of 9216, the alarm will stop.
Notice: if the sensors are not connected, the temperature display in the webpage will be
–48 °C.
3. Fan monitoring
9216 can connect to F1, F2 and F3 DC 12V fans, and monitor there rotate speeds. If the rotate speed of fan is
lower than the alarm lower limit, 9216 will send SNMP alarm data package. If the beeper is enable, the beeper
- 18 -