Aviosys 9216 - Manual (Page 6)

IP SENSOR 9216 USER MANUAL
- 5 -
9216 function describetions
1. Voltage monitoring of 9216
9216 can monitor 3 standard voltage of 12V, 5V, 3V. When these 3 under monitoring voltage are beyond of the
predetermined upper limit or lower limit, the buzzer will make an alarm as enable .
2. Temperature monitoring of 9216
9216 can monitor 2 route temperature signals. The monitoring temperature can be predetermined by user. T1
is the temperature sensor for 9216 circuit board, can indicate the own temperature of 9216. T2 and T3 is outlet
emperature sen t sors, the temperature will display to -48 degree if the sensor has not been connected. When
rature is beyond of the predetermined upper limit, the buzzer will make an alarm (if
he working fan’s rotate speed is lower than the preset
alarm function is not forbidden by user)
any of the 3 sensor’s tempe
this alarm function is not forbidden by user). Only when the temperature is lower than the upper limit again, the
alarm will stop.
3. Fan monitoring of 9216
9216 can monitoring 3 route fan ( DC fan, 12V/0.5A), if t
value, the buzzer will make an alarm(if this
. 16 route input signals monitoring 4
9216 can monitor 16 route input signals; user can get the voltage lever of each route signal. There are 8 dry
contacts (DI 01– DI 08), DI 09 – DI 16 can be set to dry contact or wet contact
. When a port is set to dry cont
9216 will supply DC 5V to contact, monitoring if there is an external switch on or switch off movement.
act,
5. Monitoring through RS232 serial-port
User can monitor the working state in each port of 9216 through the RS232 serial-port.
6. E-mail report
When 9216 starts up or the preset alarm event happens, 9216 can automatically send e-mail report to the
r. mailbox preset by use
7. Setting the password and IP
User can set the password and IP address of 9216, supporting control multiple 9216s in one local network.
VER. 1.0,