Awind McTiVia User's Manual - Manual (Page 21)

20
McTiVia User's Manual
Chapter 4 Using McTiVia-MirrorOp Sender
4
Using McTiVia
MirrorOp Sender
Setting up AP-Client Mode
To setup pure wireless connection with existing home WiFi router, you can use AP-
Client mode. For best performance, please make sure the signal between your
home router and McTiVia device is good to ensure good performance.
To setup AP-Client mode, click <WiFi AP-Client Configuration> from the menu.
Enter the info to connect to your home WiFi router and click OK to save setting.
McTiVia will reboot and connect to your home WiFi router. You need to reconnect
to McTiVia from the McTiVia- MirrorOp Sender with the same password as your
home WiFi router.