Awind McTiVia User's Manual - Manual (Page 33)

32
McTiVia User's Manual
Chapter 6 Frequently Asked Questions
Frequently Asked Questions
6
Q. AP Client configuration is delivering no IP address to McTiVia.
A. Check the strength of your wireless home router (802.11n router recommended).
When the quality of the wireless signal of your home router is too low it will not
be able to deliver an IP address to McTiVia.
A. Check if your home router is set to deliver automatically an IP address to any
other client (DHCP mode)
A. If your home router is set-up to deliver static IP addresses only, you need to
configure the McTiVia to use a static IP address out of your network IP range.
Open the McTiVia web device management page and give the McTiVia device a
Static IP address which is part of your static home IP address range.
If the answers above do not work in your situation, try to setup the McTiVia using
Ethernet cables or Power line (separately sold) environment as show in Four Setup
Possibilities section.
4:3 displayed on 16:9 screen
4:3 stretched to 16:9 screen
(objects appear wider)
16:9 displayed on 4:3 screen
16:9 stretched to 4:3 screen
(objects appear slimmer)