Baby Lock Cover Stitch (BLCS-2) Instruction and Reference Guide - Manual (Page 23)

C
O
V
E
R
S
T
I
T
C
H
21
Balanced tension -
Cover stitch has correct tension when the needle thread sews
two rows of straight stitching on the top side and the chain loop­
er forms a zig zag on the underside of the fabric.
Needle thread is too loose -
Increase the chain /cover needle thread tension dial to a higher
number. (Orange, yellow or green)
Or decrease the tension on the chain looper tension dial to
loosen the chain looper thread. (Blue)
Needle thread is too tight -
Loosen the tension by turning the chain /cover needle thread ten­
sion dial to a lower number. (Orange, yellow or green)
Make sure that the chain looper dial is correctly set for proper
tension (Blue)
Cover Stitch­ Right Narrow (Cont.)
Balanced tension
Needle thread is too loose
Needle thread is too tight
under side
top side
Cover Stitch - Right Narrow Tension Adjustments
★New_BLCS-2 Ta:BLCS-2 En.qxd 2009/05/25 16:58 ページ 21