Baby Lock Cover Stitch (BLCS-2) Instruction and Reference Guide - Manual (Page 41)

M
A
I
N
T
E
N
A
N
C
E
39
Replacing Light Bulb
15W/110V
(Screw Type)
15W/230V
(Bayonet Type)
1. For safety reasons, unplug main power cord prior of replacing light bulb.
2. Loosen screw on lamp cover and remove.
3. Remove light bulb and replace bulb with the same type rated (15watts/110volts or
15watts/230volts). See below draft for reference.
4 Replace cover and tighten screw.
★New_BLCS-2 Ta:BLCS-2 En.qxd 2009/05/25 16:59 ページ 39