BUG-O Systems CWP-18 - Manual (Page 7)

7
35"
(889 mm)
39" min - 71.2" max
(991 - 1778 mm)
43"
(1092 mm)
4.8" min - 37" max
(122 - 940 mm)
DIMENSIONS
SETUP
POWER SOURCE
Please refer to the included Lincoln NA3 User’s Manual for welding power source requirements
and system setup.
GUNS AND CABLES
All circle welders come equipped with a gun and cable assembly. It is our recommendation that
at least once a week the liner be taken out of the cable and soaked overnight in solvent solution.
To keep the wire moving, it is also recommended that a felt clip be saturated with a product like
Ferro Slick and fed through the incoming tube of the wire feeder at least once a day.
ADDITIONAL CABLES
The circle welders are supplied with the following cables:
1. CWO-3971 50' (15 m) control cables that connects the power source to the cable
connector on the top gear of the machine.
2. CWO-3040 50' (15 m) weld cable that connects the lead coming out of the top of the
machine using the quick connect connector to your power supply.
3. CWO-9406 50' (15 m) gas shielding hose that connects the gas fitting on the top of the
shaft to your shielding gas supply. (MIG models only)