BUG-O Systems Programmable Shape Machine - Manual (Page 11)

9. In the contour menu, there are a few things that need to be changed. Under machining
parameters, the contour depth should be 0.0001. This must be done in order for DeskCNC to
create a toolpath. The following parameters deal with kerf for plasma cutting as well as lead
in and exit.
Assuming zero kerf and no lead in or exit, the following settings should be applied:
Under Roughing Parameters, the Tool Diameter should be 0.0001. Under Compensation,
make sure None is checked. Under Entry, make sure None is checked. Under Exit, make sure
None is checked.
After all the settings are correct, click the contour button to generate your toolpaths.