Burst Electronics MCG-2 - Manual (Page 61)

60 MCG-2 Micro Character Generator
SPECIFICATIONS:
Power: 12 to 15 volts DC at 300mA (Polarity insensitive) or via 120
Vac - 12Vdc wall module.
Size: 5.6W x 1.5H x 7.3D inches.
Video: Input - 1 volt PP composite terminated in 75 ohms.
Output - 1 volt PP composite with text overlay (short circuit
protected).
Keyer: Internal keyer (overlay).
Background and character brightness separately adjustable from 7.5
IRE setup (Black) to 100 IRE (100% White)
Character Size: 16 height and width combinations, as follows:
Height 1 - 28 scan lines
Height 2 - 56 scan lines
Height 3 - 84 scan lines
Height 4 - 112 scan lines
Width 1 - 20 characters per line
Width 2 - 13 characters per line
Width 3 - 9 characters per line
Width 4 - 6 characters per line
Selectable background and blink modes.
Storage: 10 pages of 180 characters each (Battery backed).
Remote control:
May be remotely controlled or function as a stand-alone unit.
Remote control via RS232 link to PC computer.
Simple two letter remote control commands.
Units may be “daisy chained” to form a network controlled by
one PC computer.
Uses inexpensive RJ11 (telephone) cable.
Accessories:
RS232 to RJ11 adapter
3 foot RJ11 cable
Remote control example programs diskette
User manual
120Vac - 12Vdc wall adapter
Options:
Real Time Clock (RTC) - Maintains time and date, battery backed.