Caple CR1100SS - Manual (Page 22)

22
A
U
T
O
A
U
T
O
AUTOMATIC OVEN COOKING
To cook food automatically in the oven,
it is necessary to:
1. Set the length of the cooking time
2. Set the end of the cooking time
3. Set the temperature and the oven
cooking program.
These operations are done in the follow-
ing way:
1. Set the length of the cooking time by
pushing the button and the
button to advance, or to go back
if you have passed the desired time
(fig. 5.5). The AUTO and the
sym-
bol will be on.
2. Set the end of the cooking time by
pressing the button (the cooking
time already added to the clock time
will appear), and the
button (fig.
5.6); if you pass the desired time you
may get back by pushing the
but-
ton.
After this setting, the
symbol will
go off. If after this setting, the AUTO
flash on the panel and a buzzer gives
off, it means there was an error in the
programming.
In this case, modify the end of cooking
time or the cooking time itself by fol-
lowing again the above mentioned
instructions.
3. Set the temperature and the cooking
program by using the switch and ther-
mostat knobs of the oven (see specific
chapters).
Now the oven is programmed and every-
thing will work automatically, that is the
oven will turn on at the right moment to
end the cooking at the established hour.
During cooking, the
symbol remains
on.
By pushing the
button you can see
the time that remains until the end of
cooking.
The cooking program may be cancelled
in any moment by pushing
.
At the end of the cooking time the oven
will turn off automatically, the
symbol
will turn off, AUTO will flash and a buz-
zer will sound, which can be turned off
by pushing any of the bottons.
Turn the switch and thermostat knobs to
zero and put the programmer onto “man-
ual” by pressing the
button.
Attention: A power cut makes the clock
go to zero and cancels the set pro-
grams.
After a power cut, three zeros will flash
on the panel.
Fig. 5.5 Fig. 5.6