Caple CR1100SS - Manual (Page 23)

23
SEMI - AUTOMATIC COOKING
This function is only used to set the END
of the cooking time of the oven. There
are two ways of setting this function.
1. Set the length of the cooking time by
pushing the button and the
button to advance, or to go back-
wards (Fig. 5.7). This sets the desired
“stop” time.
or
2.Set the end of the cooking time by
pushing the button and the
button to advance, or to go back-
wards if you have passed the desired
time (Fig. 5.8).
AUTO and the symbol will be on.
Then set the temperature and the
cooking program using the oven
switch and thermostat knob (see rel-
evant sections for details).
The oven is switched on and it will be
switched off automatically at the end
of the desired time.
During cooking, the symbol
remains on and by pressing the button
you can see the time that remains
till the end of the cooking.
The cooking time can be cancelled
at any moment by pushing the
button.
At the end of the cooking, the symbol
will turn off, the AUTO will flash and a
buzzer will sound.
The buzzer can be cancelled by press-
ing any of the buttons.
Turn the switch and thermostat knobs to
zero and reset the programmer back to
“manual” by pressing the
button.
A
U
T
O
A
U
T
O
Fig. 5.7
Fig. 5.8