Caple CR1100SS - Manual (Page 24)

24
6 - How To Use the Multi-function
Attention: the oven door becomes
very hot during operation.
Keep children away.
General features
As its name indicates, this is an oven
that presents particular features from an
operational point of view.
In fact, it is possible to insert 7 different
programs to satisfy every cooking need.
The 7 positions, thermostatically con-
trolled, are obtained by 4 heating ele-
ments which are:
– Bottom element 2050 W
– Top element 1250 W
– Grill element 2200 W
– Circular element 2500 W
– Fan motor 25 W
– Oven lamp 15 W
NOTE:
Upon first use, it is advisable to operate the
oven for 30 minutes in the position
and
for another 30 minutes at the maximum
temperature (thermostat knob on position
225) in the positions
and , to elim-
inate possible traces of grease on the heat-
ing elements.
Clean the oven and accessories with warm
water and washing-up liquid.
WARNING:
The door is hot use the handle.
OPERATING PRINCIPLES
Heating and cooking in the MULTI-
FUNCTION oven are obtained in the fol-
lowing ways:
a. by normal convection
The heat is produced by the upper and
lower heating elements.
b. by forced convection
A fan sucks in the air contained in the
oven muffle, which sends it through
the circular heating element and then
sends it back through the muffle.
Before the hot air is sucked back
again by the fan to repeat the
described cycle, it envelops the food
in the oven, provoking a complete and
rapid cooking.
It is possible to cook several dishes
simultaneously.
c. by semi-forced convection
The heat produced by the upper and
lower heating elements is distributed
throughout the oven by the fan.
d. by radiation
The heat is irradiated by the infra red
grill element.
e. by radiation and ventilation
The irradiated heat from the infra red
grill element is distributed throughout
the oven by the fan.
f. by ventilation
The food is defrosted by using the
fan only function without heat.