CITIZEN G90 - Manual (Page 16)

33
15. Troubleshooting
1. When the date & mode hand is moving backward
· The Reference Position Setting Warning Function has been activated as a result not
setting the reference position after performing the all-reset procedure. Perform the
"All-Reset" and "Setting the Reference Position" procedures by referring to "4.
Setting the Reference Position".
2. When the hands do not indicate the correct positions in each mode
· The reference positions of the hands may be shifted if the watch is subjected to a
strong impact. Perform the "All-Reset" and "Setting the Reference Position"
procedures by referring to "4. Setting the Reference Position".
3. When the watch displays or operates incorrectly
· The display and operation of the watch may rarely become incorrect (such as the
hands continuing to rotate) due to the effects of static electricity or a strong impact
and so forth. If this should happen, perform the "All-Reset" and "Setting the
Reference Position" procedures by referring to "4. Setting the Reference Position".
32
4. When the date & mode hand is advancing rapidly in the clockwise direction
· The "Time Setting Warning Function" has been activated as a result of not having
set the time on the sub watch after having set the time on the main watch. Set the
time on the sub watch by referring to "6. Setting the Time and Date".
5. When the second hand is moving at 2-second intervals
· The "Insufficient Charge Warning Function" has been activated as a result of the
capacity of the secondary battery having become low due to the watch being
insufficiently charged. If this happens, promptly recharge the watch by referring to
"12. General Reference for Charging Times".
[After Replacing the Secondary Battery]
· After the secondary battery has been replaced, perform the "All-Reset" and "Setting the
Reference Position" procedures by referring to "4. Setting the Reference Position".
The watch may not operate properly unless these procedures are performed.