CITIZEN G90 - Manual (Page 9)

18 19
7. Daily Alarm (H-AL)
· The alarm tone sounds at the set time every day once the alarm has been set.
1. Setting the Alarm Time
(1) Press button (C) until the date & mode hand moves to the daily alarm mode (H-AL)
(ON or OFF).
· The sub watch hour hand and sub watch minute hand switch to the previously set
alarm time.
Sub watch hour hand: Indicates the alarm "hours".
Sub watch minute hand: Indicates the alarm
"minutes".
(2) Press button (A) to set the sub watch hour
hand and sub watch minute hand to the
desired alarm time.
· Pressing button (A) continuously causes
the hands to move continuously.
· When button (A) is pressed, the date & mode hand moves to the alarm ON position.
· Check the position of the AM/PM hand to ensure that AM or PM is set correctly for
the alarm time.
[NOTE]
· The watch automatically returns to the time display if none of the buttons are pressed
for about 1 minute.
2. Switching the Alarm ON and OFF
· The alarm is switched ON and OFF each time button (B) is pressed in the H-AL
mode, and the date & mode hand moves.
3. Stopping the Alarm
· The alarm tone can be stopped from sounding by pressing any of buttons (A), (B) or
(C) while the alarm tone is sounding.
4. Alarm Tone Monitor
· You can check the alarm tone by pressing button (B) for about 2 seconds in the H-
AL mode.
OFF
Alarm hour hand Alarm minute hand
ON
Button (B)
Button (A)
Button (C)