CITIZEN G90 - Manual (Page 3)

7
· Check that each hand indicates the following positions.
Date & mode hand: 0-SET
Sub watch hour hand, sub watch minute hand: 12:00 position
AM/PM hand: Top of the AM zone
(2) After having checked the reference position, press button (A), (B) or (C) to return the
watch to the time display. (In addition, the watch automatically returns to the time
display after 20 seconds if none of the buttons are pressed.)
* If any hand does not indicate the reference position, set the reference position for each
hand by following the procedure described in "4. Setting the Reference Position" on
the following page.
6
3. Before Using
Check the reference position of each hand by following the procedure described below
before using the watch to ensure that each function operates properly.
Reference Position: This is the default position of each hand for ensuring
that the watch functions properly.
1. Checking the Reference
Position
(1) Set the crown to the normal position.
· Press button (C) for about 3 seconds
or more until the date & mode hand
moves to the reference position
confirmation mode (0-SET).
PM
0-SET
AM
Button
(C)