Startup and login, Tartup and, Ogin – ConnectGear WA300 User Manual
Page 17
11Mbps Wireless Access Point User's Manual
Startup and Login
Follow the procedures below to startup Wireless Navigator and find the AP. Before you start
the following procedures, please be sure to connect the Ethernet cable, connect the power
cord, and then turn on the AP. All wireless clients shall be requested to set the their SSIDs
same as the AP SSID in advance before starting the following procedures.
1.
Refer to previous section " Install the Wireless Navigator to your PC" in order to
startup the configuration.
2.
Click Start and select Programs, Wireless Navigator and then Wireless Navigator. Or,
just double-click the Wireless Navigator icon on your desktop screen.
3.
The Wireless Navigator starts up, and search via wired LAN or Wireless LAN (depend.
17