ConnectGear WA300 - Manual (Page 5)

11Mbps Wireless Access Point User's Manual
1. Introduction
Congratulations on your purchase of this 11Mbps Wireless Access Point (AP). This product
is designed specifically for your 11Mbps wireless LAN environment needs. It is easy to
configure and operate even for non-technical users. Instructions for installing and
configuring this product are included in this manual. Before you install and use this product,
please read the manual carefully so you may take full advantage of its functions.
The Wireless Access Point Features
LAN Features
DHCP Client – Enable the AP to act as a DHCP client to receive IP address from
DHCP Server in the wired Ethernet LAN.
Built-in 10BaseT LAN Port – It’s designed to bridge between wired and wireless LAN.
Wireless Features
Standard Compliant – The AP complies with IEEE802.11b standard, and it is
interoperable with IEEE802.11b-Compliant Equipment
High Speed Wireless Connection – Using Diversity Dipole Antenna to secure reliable
11Mbps wireless data rate connection.
Data Rate Auto Fall-Back - Provides 11, 5.5, 2 and 1Mbps wireless data rate shifting
dynamically to guarantee availability and reliability of wireless connections
Roaming – Provides seamless roaming within 802.11b wireless LAN infrastructure.
Long Distance Reach – Support 80M indoor and 300M outdoors long operating
distance under normal environment condition.
Configuration & Management
Easy to Setup – With windows-based Wireless Navigator Utility, user can easily setup
the IP address of this AP, and upgrade the firmware.
Easy to manage – User can use any WEB browser from anywhere on the wired or
wireless LAN to configure the AP easily.
Security
Configuring Protection – Provides password protection to prevent unauthorized users
from changing the configuration
Wireless LAN Security - Provide 64-bit & 128-bit Wired Equivalent Privacy encryption
to protect the wireless data transmissions.
5