ConnectGear WA300 - Manual (Page 18)

11Mbps Wireless Access Point User's Manual
4.
The utility will show the AP and other wireless devices found in the same network,
where your PC is located.
Note! If the AP is not shown in the list, please make sure all the cables are well
connected.
5.
Double-click on the AP, then you will access into its built-in web server, and it will show
as below. Then directly click OK button. (Default setting is no user name and password
needed).
Note! If you cannot access into AP’s built-in web server, please make sure if your
PC now is in the same subnet with AP. Please us right-click of mouse to click
on the AP listed in Wireless Navigator. “Set IP address” option will pop out,
and then change IP address of AP to the same subnet as your PC.
18