ConnectGear WA300 - Manual (Page 26)

11Mbps Wireless Access Point User's Manual
The Admin Tab
ADMINISTRATION: Allows to change the device’s system configurations.
Change password: Default none password.
Reboot access point: When any setting was changed, the AP MUST be reboot so
that the change can be confirmed.
Reset to factory defaults: This option will ERASE all the current settings, and
return back to the factory defaults.
Note! There could be several PCs over wired or wireless LAN installing with
Wireless Navigator Utility, and managing the AP simultaneously. Hence, it is
suggested to change the password.
Note! You may need to re-load the page to see any new settings.
26