Crest Electronics CRE57000 TRAIN ENGINEER REVOLUTION MANUAL - Manual (Page 17)

17
BASIC OPERATING TROUBLESHOOTING
“The engine runs backwards when the transmitter is set to forward”
1) Press MENU to display the MAIN SET
UP menu.
2) Press the STOP/ENTER key to select:
1.ASSIGN FUNCTION
3) Use the p and q keys to scroll down
the list of functions to:
g.MOTOR
4) Use the t and u keys to toggle motor direction between NORmal and
REV
erse.
5) Press MENU to exit to the main menu screen.
6) Press MENU again to exit to the operating screen.
The locomotive will now respond to direction in the opposite way that it did initially
and should now match the transmitter indication.
“My engine’s headlight does not match the direction of the locomotive”
1) Press MENU to display the main set up
menu.
2) Press the STOP/ENTER key to select:
1.ASSIGN FUNCTION
3) Use the p and q keys to scroll down
the list of functions to:
h.HD DIR
4) Use the t and u keys to toggle the headlight direction between NORmal and
REV
erse.
5) Press MENU to exit to the main menu screen.
6) Press MENU again to exit to the operating screen.
The headlight will now match the direction of travel of your locomotive.
1.ASSIGN FUNCTIONS
c.NAME [L49 ]
d.ROAD No. [RdNo]
e.MOMENTUM [ 10%]
f.DELAY [3.0s]
g.MOTOR [NOR] ¤
1.ASSIGN FUNCTIONS
d.ROAD No. [RdNo]
e.MOMENTUM [ 10%]
f.DELAY [3.0s]
g.MOTOR [REV]
h.HD DIR [NOR] ¤