DFI CD9A3 series - Manual (Page 33)

www.dfi .com Chapter 4 BIOS Setup
33
Chapter 4
Setup Prompt Timeout
Selects the number of seconds to wait for the setup activation key. 65535(0xFFFF)
denotes indefinite waiting.
Bootup NumLock State
This allows you to determine the default state of the numeric keypad. By default,
the system boots up with NumLock on wherein the function of the numeric keypad
is the number keys. When set to Off, the function of the numeric keypad is the
arrow keys.
Quiet Boot
Enables or disables the quiet boot function.
Option ROM Messages
Set display mode for option ROM.
Boot Option #1
Set the system boot order.
Hard Driver BBS Priorities
Set the order of the legacy devices in this group.
Boot
Number of seconds to
wait for setup activation
key.
65535(0xFFFF) means
indefi nite waiting.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Boot Confi guration
Setup Prompt Timeout
Bootup NumLock State
Quiet Boot
CSM16 Module Version
Option ROM Messages
Boot Option Priorities
Boot Option #1
Hard Driver BBS Priorities
Save & Exit Chipset Advanced Security Main Boot
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
1
[On]
[Disabled]
07.65
[Force BIOS]
[SATA SM: GLS85LS1....]
Security
Administrator Password
Sets the administrator password.
User Password
Sets the user password.
Set Administrator
Password.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is only
asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will have
Administrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
HDD Security Confi guration
Save & Exit Chipset Advanced Main Boot Security
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit