DFI CR908-B - Manual (Page 26)

www.dfi .com Chapter 3 Hardware Installation
26
Chapter 3
Standby Power LED
Standby
Power LED
This LED will light when the system is in the standby mode.
Cooling Option
Heat Sink with Cooling Fan
• “1” and “2” denote the locations of the thermal pads designed to contact
the corresponding components that are on CR908-B.
Top View of the Heat Sink
Bottom View of the Heat Sink
1
2
Important:
Remove the plastic covering from the thermal pads prior to mounting the heat sink
onto CR908-B.