DFI CR908-B - Manual (Page 31)

www.dfi .com Chapter 4 BIOS Setup
31
Chapter 4
ACPI Power Management Configuration
This section is used to configure the ACPI Power Management.
Enables or disables BIOS
ACPI Auto Confi guration.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
ACPI Settings
Enable ACPI Auto Confi guration
ACPI Sleep State
Resume by PME
Resume by RTC Alarm
Advanced
[Disabled]
[S3 (Suspend to RAM) ]
[Disabled]
[Disabled]
ACPI Sleep State
Selects the highest ACPI sleep state the system will enter when the Suspend button is
pressed.
S1(POS) Enables the Power On Suspend function.
S3(STR) Enables the Suspend to RAM function.
Resume by PME
Enable this field to use the PME signal to wake up the system (via PCIE and onboard
(LAN).
Resume by RTC Alarm
When Enabled, the system uses the RTC to generate a wakeup event.
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
ESC: Exit
PC Health Status
This section displays hardware health monitor.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
System Hardware Monitor
CPU SmartFan
CPU Temperature
CPU FAN Speed
System FAN Speed
VCore
VGFX
DDR
+1.05V
CPU
VCCSA
Advanced
[Enabled]
: +60 C
: 4968 RPM
: N/A
: +0.958 V
: N/A
: +1.519 V
: +0.997 V
: +0.859 V
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
ESC: Exit
Enable/ Disable CPU
SmartFan