DFI CA900-B - Manual (Page 112)

112
4
Supported Software
AHCI For F6 During Windows Setup Floppy Driver
You need to prepare an AHCI driver floppy diskette that you will need when you
install the AHCI driver during Windows XP installation.
1. Click “AHCI For F6 Dur-
ing Windows Setup Floppy
Driver” on the main menu.
Windows Explorer will ap-
pear showing the locations
of the installation files.
2. Click the Edit menu then
click “Select All”.
3. Insert a blank floppy dis-
kette into a floppy disk
drive.
4. Right click on the files then
select Floppy Disk Drive.
The system will format and
write the necessary driver
files into the diskette.