Chapter 1 - introduction, Specifications, Introduction – DFI CA900-B User Manual

Page 9

Advertising
background image

1

9

Introduction

Processor

Chipset

System Memory

Expansion Slots

Graphics

Audio

Chapter 1 - Introduction

• Socket P 478-pin Micro FCPGA for:
- Embedded Intel

®

Core

TM

2 / Celeron

®

M processor

• 1066/800/667MHz FSB
• Intel

®

45nm transistor technology

• Intel

®

Trusted Execution Technology (Intel

®

TXT)

• Intel

®

Virtualization Technology (Intel

®

VT) DMA

• Supports Data Bus Inversion (DBI)
• Supports Message Signaled Interrupt (MSI)
• Supports Intel

®

architecture with Intel

®

Wide Dynamic Execu-

tion

• Intel

®

chipset

- Intel

®

GM45 Express chipset

- Intel

®

ICH9M I/O Controller Hub

• Two 204-pin SODIMM sockets
• Supports DDR3 800/1066MHz
• Supports up to 8GB system memory
• 64-bit wide per channel
• 256Mb, 512Mb, 1Gb and 2Gb memory technologies
• Supports non-ECC x8 and x16 DIMMs
• Supports DDR3 On-Die Termination (ODT)
• Supports partial writes to memory using data mask signals

(DM)

• Supports 1 PCI Express x16
• Supports up to 4 PCI Express x1 (PCIE 1.1)
• Supports up to 4 PCI (PCI 2.3)
• Internal graphics features
- Intel GMA 4500 integrated graphics engine
- 533MHz core render clock
- Supports 3D, 2D and video capabilities, DX10 and OpenGL

2.1

• Integrated graphics interface
- Analog CRT
- Integrated 300MHz
- Analog monitor supports up to QXGA
- LVDS interface
- Panel support up to UXGA (1600x1200)
- 25MHz-112MHz single/dual channel up to 2x24bpp panel

support

• Supports AC97 on Azalia interface (depends on the CODEC

used on the carrier board)

Specifications

Advertising
This manual is related to the following products: