DFI CA900-B - Manual (Page 90)

90
4
Supported Software
AHCI For F6 During Windows Setup Floppy Driver
You need to prepare an AHCI driver floppy diskette that you will need when you
install the AHCI driver during Windows 7 / Windows Vista installation.
1. Click “AHCI For F6 Dur-
ing Windows Setup Floppy
Driver” on the main menu.
Windows Explorer will ap-
pear showing the locations
of the installation files.
2. Click the Organize menu
then click “Select All”.
3. Insert a blank floppy dis-
kette into a floppy disk
drive.