Installing ca900-b onto a carrier board – DFI CA900-B User Manual
Page 32
Advertising
32
2
Hardware Installation
Installing CA900-B onto a Carrier Board
1. The photo below shows the locations of the mounting holes.
Important:
The carrier board used in this section is for reference purpose only and
may not resemble your carrier board. These illustrations are mainly
to guide you on how to install CA900-B onto the carrier board of your
choice.
2. Insert the provided mounting screws into the mounting holes - from the bot-
tom through the top of the carrier board.
Mounting hole
Mounting screws
Advertising
This manual is related to the following products: