DFI G5C900-B - Manual (Page 111)

111
4
Supported Software
AHCI for F6 During Windows Setup Floppy Driver
This is used to create a floppy driver diskette needed when you install
Windows
® XP using the F6 installation method. This will allow you to install
the operating system onto a hard drive when in AHCI mode.
Click “AHCI for F6 During Windows Setup Floppy Driver” on the main
menu.
1. Inser t a blank floppy
diskette then click OK.
2. Make sure you have a
backup of the data in
the disk. Clicking Yes will
erase all data.
3. The system is currently
formatting and writing
the necessary driver files
into the diskette.