DFI G5C900-B - Manual (Page 64)

64
COM Express Board
Load Fail-Safe Defaults
The “Load Fail-Safe Defaults” option loads the troubleshooting de-
fault values permanently stored in the ROM chips. These settings are
not optimal and turn off all high performance features. You should
use these values only if you have hardware problems. Highlight this
option in the main menu and press <Enter>.
If you want to proceed, type <Y> and press <Enter>. The default
settings will be loaded.
Phoenix - AwardBIOS CMOS Setup Utility
Esc : Quit
F10 : Save & Exit Setup ↑ ↓ → ← : Select Item
Load Fail-Safe Defaults
X Standard CMOS Features
X Advanced BIOS Features
X Advanced Chipset Features
X Integrated Peripherals
X Power Management Setup
X PnP/PCI Configurations
X PC Health Status
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving Load Fail-Safe Defaults (Y/N)?
Current FAN1 Speed to 5VSB(V)
These fields will show the fan speed and output voltage of the
monitored devices or components.