DFI G5C900-B - Manual (Page 57)

57
COM Express Board
Power Management Setup
The Power Management Setup allows you to configure your system
to most effectively save energy.
The settings on the screen are for reference only. Your version may not be
identical to this one.
ACPI Function
This function should be enabled only in operating systems that sup-
port ACPI. Currently, only Windows
® ® ® ® ® 98/2000/ME/XP supports this
function. If you want to use the Suspend to RAM function, make sure
this field is enabled then select “S3(STR)” in the “ACPI Suspend Type”
field.
ACPI Suspend Type
This field is used to select the type of Suspend mode.
S1(POS) Enables the Power On Suspend function.
S3(STR) Enables the Suspend to RAM function. If you are us-
ing the Windows
® ® ® ® ® 98 operating system, refer to “Us-
ing the Suspend to RAM Function” in appendix B for
more information.
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
Menu Level X
↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
ACPI Function
ACPI Suspend Type
x Run VGABIOS if S3 Resume
Power Management
Video Off Method
Video Off In Suspend
Suspend Type
MODEM Use IRQ
Suspend Mode
HDD Power Down
Soft-Off By PWR-BTTN
Wake-Up by PCI Card
Power On by Ring
USB KB Wake-up From S3
Resume By Alarm
x Date(of Month) Alarm
x Time (hh:mm:ss) Alarm
Enabled
S3(STR)
Auto
User Define
DPMS
Yes
Stop Grant
3
Disabled
Disabled
Instant-Off
Disabled
Disabled
Disabled
Disabled
0
0 : 0 : 0