DFI QB702-B - Manual (Page 29)

www.dfi .com Chapter 3 BIOS Setup
29
Chapter 3
Updating the BIOS
To update the BIOS, you will need the new BIOS file and a flash utility, AFU238.EXE.
Please contact technical support or your sales representative for the files.
To execute the utility, type:
A:> AFU238 BIOS_File_Name /b /p /n
then press <Enter>.
C:\AFU\AFU238>afu238 fi lename /b /p /n
+--------------------------------------------------------------------------------------------------------+
AMI Firmware Update Utility(APTIO) v2.25
Copyright (C)2011 American Megatrends Inc. All Rights Reserved.
+--------------------------------------------------------------------------------------------------------+
|
| |
|
Reading fi le ..............................
Erasing fl ash .............................
Writing fl ash .............................
Verifying fl ash ..........................
Erasing BootBlock ....................
Writing BootBlock ....................
Verifying BootBlock .................
C:\AFU\AFU238>
done
done
done
done
done
done
done
After finishing BIOS update, please turn off the AC power. Wait about 10 seconds and then
turn on the AC power again.