Digi-Star EZ 3600V Manual USB - Manual (Page 13)

Loading and feeding in complete load mode
D3715-GB Rev E EZ3600 User's manual 10
1. The first ingredient and the corresponding
amount will flash on the display.
2. As soon as the amount starts to approach
zero the alarm light starts flashing and you
will hear an alarm signal.
3. a) Manually advance next ingredient: When
the ingredient amount to be loaded has been
reached, press to accept this amount.
Press again to advance to the next
ingredient.
b) Automatically advance next ingredient:
When the ingredient amount to be loaded has
been reached, the weighing indicator will
automatically advance to the next ingredient.
Note: See pages 26, 27 and 28 for settings.
Note: To load the ingredients in a different order, press or to select the required
ingredient. Press to start loading this ingredient.
Feeding groups
When the ingredients have been loaded, the
weighing indicator will show the first group to be
fed.
1. a) Manual advance:
Press to select the group to be fed.
When the amount to be fed has been dosed
out, press to accept this. Press
again to advance to the next group,
or
b) Automatic advance:
When the amount to be fed has been dosed
out, the weighing indicator will automatically
advance to the next group.
After the last group has been fed, following
message will appear on the display:
Recipe complete.
Note: Do not press .
To feed the groups in a different order, press or to select the required group.
Press to start feeding this group.
corn
GROUP 1
1
3
2
1