Digi-Star EZ 3600V Manual USB - Manual (Page 22)

Programming recipes
D3715-GB Rev E EZ3600 User's manual 19
5. Use and to run through the list
with ingredients.
6. Press to select the displayed
ingredient.
7. Enter the required ingredient amount*.
8. Press to confirm the entered amount.
9. Repeat steps 5 thru 8 for the other
ingredients in the recipe to be programmed.
* With the programming method Percentage (%) per ingredient enter 75%, for example, as 75.00
and 5.75% as 5.75.
10. Press to confirm the entered recipe.
11. The weighing indicator calculates and
displays the total amount of the recipe ( TOTAL).
12. Repeat steps 1 thru 11 for the other recipes
to be programmed.
13. Press to quit program mode.
Changing ingredient amounts in the recipe
1. Press and hold until the weighing
indicator emits a high pitched signal and
PROGRM is displayed.
2. Press repeatedly until the recipe
number to be changed is displayed.
3. Press to select this recipe.
6/8
22.00
7
corn
5
totAl
10
13
1/2
3
Rec_