Digi-Star EZ 3600V Manual USB - Manual (Page 30)

Commonly used direct access numbers
D3715-GB Rev E EZ3600 User's manual 27
Group tolerance
[ T MTHD] & [PENTOL]
Only available in group list mode.
1. Enter 462.
2. Press .
3. Press again to select WEIGHT or PERCENT.
4. Press . On the display appears: pentol.
5. Enter the required value in weight or percent.
6. Press .
Delay time
[ DELAY]
Enter the time that the weighing indicator should wait before advancing to the next ingredient to be
loaded.
1. Enter 443.
2. Press .
3. Press , until the required delay time
(seconds) appears on the display:
MANUAL, 1, 2, 3, 5, 7, 10, 20, 30, or 60].
4. Press .
Note: If automatically advancing to the next
ingredient is not required, set this setting to
MANUAL.
1/5
2
3
4/6
462
1
2
3
4
443