Digi-Star EZ 3600V Manual USB - Manual (Page 23)

Programming recipes
D3715-GB Rev E EZ3600 User's manual 20
4. The first ingredient name is displayed,
followed by AMOUNT.
5. Enter the new amount.
6. Press to save the new amount and
continue with the following ingredient.
7. Repeat steps 5 and 6 for the other
ingredients in the recipe.
8. Press to save the changed recipe.
9. Press .
Note: It is only possible to change ingredient amounts. To add new ingredients to the recipe, first
delete the recipe, then program it again.
Deleting recipe
1. Press and hold until the weighing
indicator emits a high pitched signal and
PROGRM and the first recipe number are
displayed in succession.
2. Press repeatedly until the required
recipe number is displayed.
3. Press and hold until press zero to
delete recipe – press net/gross to quit are
displayed.
4. Press to delete this recipe.
5. Press to return to normal weighing
mode.
Calling up a recipe
1. Press repeatedly until accum is
displayed.
2. Press repeatedly until the required
recipe is displayed.
3. Press to display the various
ingredients in the selected recipe.
4. Press to return to normal weighing
mode.
corn
5
9
6/8
4
5
Rec_
3/4
1/2
accum
1
2
4
3