Net and gross mode – Digi-Star StockWeigh 500 User Manual
Page 15
![background image](/files/781548/content/doc015.png)
Operators Manual
D3632 US-B
11
Net and Gross Mode
To Select Gross Mode
GROSS mode displays the weight change since the unit was last ZERO/BALANCED.
Press [NET/GROSS]
Note:
The scale is in GROSS mode if there is a flashing arrow pointing toward the GROSS
text just above the [ON/RECORD] key.
Gross mode is used for single animal weighing.
To Select Net Mode:
NET mode displays the weight change after a TARE has been performed. TARE is a
temporary “zero” point.
If the scale “TARE” weight has not been entered, press [TARE] to acquire a “zero.”
Or
If in Gross mode, press [NET/GROSS]. The [NET/GROSS] key is an alternating action key.
If the scale is in the GROSS mode, pressing the [NET/GROSS] key will place it in the NET
mode. If the scale is in the NET mode, pressing the [NET/GROSS] key will place it in the
GROSS mode.
The scale is in NET mode if there is a flashing arrow pointing toward the NET text in the
lower left corner of the display.