ETA Bross - Manual (Page 24)

– Do not insert the power plug into the electric power socket and do not pull it out of
the electric power socket with wet hands or by pulling on the power cord!
– The product is intended for home use and similar (in shops, offices and similar
workplaces, in hotels, motels and other residential environments, in facilities
providing accommodation with breakfast). It is not intended for commercial use!–
Never submerge the appliance under water and do not wash under running water!
– Do not leave the appliance in operation without supervision and supervise it for
the entire time that food is being prepared!
– Do not use the appliance in a food-processing mode in container B and blender D
simultaneously.
– The food-processing function may be used only if the propulsion cover A10 is
properly placed and fixed on the propulsion unit A.
– Check if the A1, A2 buttons are not on before each plugging in to the outlet and
changing of the attachments. If so, press the ON / OFF button. The lighting of the
buttons will turn off which indicates that the appliance is turned off.
– After finishing work and before each maintenance, always turn the appliance off
and unplug it from the el. outlet (see V. MAINTENANCE).
– Use the appliance only in the working position in places, where there is no risk of it being
knocked over and at a suffi cient distance from sources of heat (e.g. fi re stoves, electric/
gas stoves, cookers, etc.), and wet surfaces (kitchen sinks, wash basins etc.).
– do not turn on the appliance without any ingredients inside!
– Use the appliance only with accessories designed for this model. The use of other
accessories may present a danger for the user.
– do not insert accessories into any body cavities.
– Never insert your fi ngers into the fi lling opening and do not use a fork, knife, spatula,
spoon, etc. Use only the supplied pusher for this purpose.
– Assembling the container, container lid, blender and propulsion cover properly, the safety
switches will release and the appliance may be turned on. The appliance can not be
turned on without the lid, blender or propulsion cover on!
– do not use the safety switch controlled by the container and container lid and the safety
switch controlled by the blender or propulsion cover to turn off the appliance.
– Before removing the lid or container, let the rotating part stop.
– do not process ingredients with temperature higher than approx. 80 °C (170 °f). When
mixing hot liquids pull out the plug d4 from the blender lid.
– When mixing or blending liquids, never use a greater volume than is indicated on the
bowl.
– If the processed foods start to stick to the accessories (e.g. on the blades or graters),
turn off the appliance and carefully clean the accessories (e.g. with a spatula).
– Make sure that the power cord does not come into contact with the rotating part of the
appliance.
– The power cord must not be damaged by sharp or hot objects, by an open fl ame and it
must not be submerged under water.
– Never place it on hot surfaces and do not leave it hanging over the edge of a table or a
work bench. If the cord is brushed against or pulled by for example children the appliance
may tip over or be pulled down and lead to serious injuries!
– If the use of an extension cord is necessary, then it must not be damaged and must meet
the valid norms in force.
– Only use the appliance with original accessories from the manufacturer.
– Use this appliance only for the purpose for which it was designed as specifi ed in this
user‘s manual. Never use the appliance for any other purpose.
24
GB