GAI-Tronics LE200-RM Rack-Mount Page/Party Line Extender - Manual (Page 31)

Pub. 42004-392G
M ODEL LE200-RM R ACK -M OUNT P AGE /P ARTY
®
L INE E XTENDER P AGE 29 of 56
e:\standard ioms - current release\42004 instr. manuals\42004-392g.doc
09/14
When using GAI-Tronics 60029 Series system cable, follow the wiring color code as shown in Table 27
below:
Table 27. Color Codes for GAI-Tronics 60029 Series System Cable
Terminal
Designator GTC System
Cable Color Code
Description
P5-1/P8-1 PAGE - L1 Red/blue
Page line audio
P5-2/P8-2 PAGE - L2 Blue/red
P5-3/P8-3 PARTY 1 - L1 Red
Party line 1 audio
P5-4/P8-4 PARTY 1 - L2 Tan/red
P5-5/P8-5 PARTY 2 - L1 Violet
Party line 2 audio
P5-6/P8-6 PARTY 2 - L2 Tan/violet
P5-7/P8-7 PARTY 3 - L1 Blue
Party line 3 audio
P5-8/P8-8 PARTY 3 - L2 Tan/blue
P5-9/P8-9 PARTY 4 - L1 Brown
Party line 4 audio
P5-10/P8-10 PARTY 4 - L2 Tan/brown
P5-11/P8-11 PARTY 5 - L1 Yellow
Party line 5 audio
P5-12/P8-12 PARTY 5 - L2 Tan/yellow
T1/E1 Data Connections
A two-pair cable is required for the T1/E1 data line connection between Line Extenders. Connect the
T1/E1 data cable to P19 on the Main PCBA. The transmit (TX) and receive (RX) pairs between Line
Extenders must be wired in a cross-over fashion such that the TX terminals of Line Extender #1 are
connected to the RX terminals of Line Extender #2 and vice-versa. Each data cable connection point is
labeled next to the terminal block P19 as shown below.
Figure 14. Data Line Terminals