GAI-Tronics LE200-RM Rack-Mount Page/Party Line Extender - Manual (Page 50)

Pub. 42004-392G
M ODEL LE200-RM R ACK -M OUNT P AGE /P ARTY
®
L INE E XTENDER P AGE 48 of 56
e:\standard ioms - current release\42004 instr. manuals\42004-392g.doc
09/14
Testing and Troubleshooting
Generating Audio Test Signals
The Model LE200-RM is capable of generating several testing waveforms onto the audio lines of the
page/party system to aid in system testing and troubleshooting. Rotary switch SW1 on the Main PCBA
determines which Page/Party
® audio line will receive the test waveform. DIP switch SW2 determines
which testing waveform is generated. Closing DIP switch SW2-8 enables the test waveform. Switches
SW2-5 through SW2-7 select a test waveform. Note that the frequency selections are different on the
selected audio party line. Refer to tables below for valid switch settings.
Table 49.
SW1 Selected
Page/Party ® Line
Selected Tone SW2-5 SW2-6 SW2-7 SW2-8
1 Party line #1 7 kHz (sine wave) Open Open Open Closed
6 Page line 4 kHz (sine wave) Closed Open Open Closed
2 kHz (sine wave) Open Closed Open Closed
1 kHz (sine wave) Closed Closed Open Closed
500 Hz (sine wave) Open Open Closed Closed
125 Hz (sine wave) Closed Open Closed Closed
1 kHz (saw tooth wave) Open Closed Closed Closed
31 Hz pulses Closed Closed Closed Closed
SW1 Selected
Page/Party ® Line
Selected Tone SW2-5 SW2-6 SW2-7 SW2-8
2 Party line #2 3.5 kHz (sine wave) Open Open Open Closed
3 Party line #3 2.0 kHz (sine wave) Closed Open Open Closed
4 Party line #4 1.0 kHz (sine wave) Open Closed Open Closed
5 Party line #5 500 Hz (sine wave) Closed Closed Open Closed
250 Hz (sine wave) Open Open Closed Closed
125 Hz (sine wave) Closed Open Closed Closed
1 kHz (saw tooth wave) Open Closed Closed Closed
31 Hz Pulses Closed Closed Closed Closed
N OTE : Remember to restore SW1 to “0” and SW2 to its initial setting when no longer generating test
signals.