Guntermann & Drunck UCON-IP-NEO Web Interface User Manual
Page 11
Guntermann & Drunck GmbH
UCON-IP-NEO Web interface
Use the
Network settings section to define via which IP address the IP user
module
is to be accessed in the network.
In the area
IP assignment, you can choose between the settings Static and
DHCP (default: static).
If you set the entry in the field
IP configuration to DHCP, no additional
settings are required.
The new IP address is now displayed.
If you set the entry in the area
IP configuration to Static, you have additional
configuration options in the following fields:
IP Address:
The IP address to be assigned to the IP user module
in your
network
Net mask:
The standard setting is 255.255.255.0
Note: If you change the IP address during an active IP session, the following
message window will alert you to this fact:
Page
11