Guntermann & Drunck UCON-IP-NEO Web Interface - Manual (Page 18)

Guntermann & Drunck GmbH UCON-IP-NEO Web interface
3.1.2.3 Adjust time and date settings
In order to track log messages, the internal clock of the IP user module
must
be set to the correct time and date.
This can be automated via a network time protocol server or you do this
manually.
Note:
Be sure to consider the notes regarding the impermissible special characters in
Chapter 1.2 !
Select the
automatic time setting via an NTP server, set the entry in the area
Date/time assignment to NTP server.
NOTE: Before you activate the time server, ensure that the time you
specified via the manual settings differs by no more than +/- 5 min from
your time server.
In the field
NTP server 1, enter the IP address or the host name of the time
server. Alternatively, you can set another time server in the field NTP server 1.
In the field Time zone, you enter the applicable value.
For
manual time setting, please proceed as follows:
Set the entry in the field Date/time assignment to manually.
Enter the values that apply for
you in the fields Time Zone, Date, and Time.
Page 18