ILS ILS24H Installation - Manual (Page 2)

1. Introduction.
Dear systems installer,
You have received our ILS24 lectern system in a carton box or wooden crate on pallet.
1. Lift the carton box carefully and slowly up to reveal the ILS24.
a. If the system arrives in a crate, open the top slightly and unscrew the pallet in the
bottom, then lift all sides up to remove the entire crate, the system is now again on its
pallet.
2. Unwrap the padding. Bring the lectern to its final destination.
3. Before removing the pallet, please make sure that there is no cable hanging from the bottom
hole of the lectern, with the risk that such cables could be damaged when taking the pallet away.
4. Now that the lectern is on the floor, you can use the Easymover by inserting it under the
presenter side of the lectern such that the 2 upward pins are catching in the holes of the toe
space. (See installation instructions Easymover ILS05A) <picture 2>
5. Without easy mover the lectern cabinet can be lifted by rotating it forward with the top handles
such that it rests on the rollers. (This is a heavy product and at least 2 strong persons should do
this!)
The lectern is now in its final destination.