Setting up the piano, Prepar a tion before u se – Kawai CA15 User Manual

Page 11

Advertising
background image

11

P

repar

a

tion Before U

se

Setting Up the Piano

1. Connecting the power adaptor

Connect the AC power adaptor to the ‘DC IN’ inlet located on

the underside of the instrument, as indicated below.

2. Connecting the power adaptor to an outlet

Connect the AC power adaptor to an AC outlet.

3. Turning on the power

Press the POWER switch, located on the right hand side of the

instrument’s front panel.

The LED indicator for the SOUND SELECT button will turn on

and the Concert Grand sound will be selected automatically.

4. Adjusting the volume

Move the MASTER VOLUME slider up and down to increase

and decrease the volume level of the instrument’s speakers, or

headphones if connected.

Increase

volume

Decrease

volume

Adjust the volume to a

comfortable listening level

- the middle is often a good

starting point.

„ Using headphones

Use the jacks located beneath the keyboard on the left hand

side, to connect stereo headphones to the CA15 digital piano.

When a pair of headphones is connected, sound will not be

produced by the speakers. Up to two pairs of headphones can

be connected and used simultaneously.

„ Adjusting the pedal support bolt

A pedal support bolt is attached at the base of the pedal board

to aid stability when the pedals are pushed. Turn the bolt anti-

clockwise until it makes contact with the fl oor and supports

the pedals fi rmly.

When moving the instrument, always adjust or

remove the pedal support bolt, then readjust

when the instrument is in its new position.

Advertising
This manual is related to the following products: