Connecting to other devices – Kawai ATX2/ATX2-f User Manual
Page 109
109
Ap
p
e
n
d
ix
Connecting to Other Devices
The AnyTimeX2 piano features a variety of jacks that allow the instrument to be connected to MIDI devices,
computers, speakers, and mixers. It is also possible to connect external audio sources, such as an MP3 player, tablet,
or a secondary keyboard, to the instrument. The illustration below provides a visual overview of the connectors
and their typical applications.
Connect the instrument
to external speakers,
amplifi ers, mixers, etc.
Connect the instrument
to MIDI modules, other
instruments/devices, etc.
Connect the audio from
other devices to the
instrument’s speakers.
Before connecting the AnyTimeX2 piano to other devices, ensure that the power to both the instrument and the
other device is turned off . If connections are established while the power is turned on, extraneous noise that
can damage the AnyTimeX2 piano may activate the instrument’s amplifi er protection circuit, preventing any
sound from being produced. If this occurs, turn the power off and then on again to reset the amplifi er protection
circuit.
Do not connect the LINE IN and LINE OUT jacks of the AnyTimeX2 piano together with the same cable. An audio
loop (oscillation sound) will occur, resulting in damage to the unit.